WHY DO YOU NEED LINX?
A unique modern controller that declutters the dashboard and centralises the command of vehicle accessories by replacing classic switches, gauges and monitors with one sleek and smart driver interface. Built on an expandable platform, LINX will continue to evolve your on and off-road driving experience both now and into the future.
FRONT & REAR TRACTION
Removing up to two (2) switches from your dashboard (front and rear Air Locker), the Front & Rear Traction module automatically senses driver input and activates the compressor as required.
Capable of switching each locker independently or allowing the front locker to be activated only when the rear locker is engaged first (a traditional safety feature), each locker key is highlighted in the display’s theme colour when selected, or grey when not selected, also showing a locked/unlocked symbol below the icon.
* Where operating the Air Locker Activation Compressor only, a Linx Relay Wiring harness will be required (Part No. 180422)
COMPRESSOR & PRESSURE CONTROL
TYRE PRESSURE MONITORING SYSTEMMonitor and keep a close eye on your vehicle and trailer's tyre pressure with the Tyre Pressure Monitoring System (TPMS) Bluetooth module – integrating your ARB TPMS sensors with the LINX device!Installed via the vehicle's 12V power supply, a Bluetooth comms box (sold separately) reads data from the ARB TPMS' sensors and conveniently shows independent readings from your vehicle and up to 3 trailers straight onto your LINX display.
AIR SUSPENSION CONTROL
When fitted with an optional LINX Pressure Control Kit, LINX can control up to 4 airbags either as pairs (to level front to rear) or independently*, allowing for levelling of the vehicle side to side and front to rear. Users can pre-set up to four personalised pressure modes which can be appropriately named to suit common loads or trailer types so they are available at the push of a single button. Many 4WDrivers install airbag suspension systems to help carry the occasional loads associated with towing boats, camper trailers and caravans. No matter if your vehicle is on uneven ground, travelling or stationary, LINX will only automatically maintain the pressure in the air suspension when it detects the vehicle is both stationary and on stable ground.* Requires optional LINX Air Bag Isolation Kit (Part No. 7450109)
INCLINOMETERUsing sensor data from the onboard controller, the Inclinometer module displays the roll and pitch of the vehicle, independent of the positioning of the Display. Users can set a pitch and roll warning limit to suit their vehicle so an alarm triggers to warn when the set limit is approaching.
For Elements, ZERO and Classic Series I fridges (2014 - March 2019 models), the module can display the fridge’s current temperature, power input voltage and compressor status. For Elements and Classic Series I Fridges (2014 - March 2019 models), the module can display the fridge's current temperature, power input voltage and compressor status. When connected to a Classic Series II Fridge Freezer, additional enhanced features include the ability to turn the fridge on/off, temperature control, preset temperatures and power while also providing feedback on the fridge lid position (open or closed). The display unit (Celsius or Fahrenheit), battery protection (high, medium or low) and fridge display brightness (high or low) can all also be altered in the module's settings.
CLOCKFeaturing a range of time-related functions, the Clock module not only shows the time of day in 12 or 24-hour format, it can also be used as a countdown timer, alarm and stopwatch and can even display the world time.
Beyond its expansive range of modules, LINX presents a truly adaptable platform with module-level settings as well as many additional general settings. Within the general settings of LINX users can customise the colour theme to match any interior dash theme; apply night mode for automated dimming which is activated by the vehicle’s headlights; and set the preferred unit measurements for air pressure, speed and temperature. As an expandable platform, simply connecting the screen to a WiFi point allows you to upgrade your LINX with any new updates at the press of a button.
Depending on the vehicle model, the fitting process can take a few hours and is best performed by a trained ARB Technician. Connecting your 12 V accessories such as compressor, Air Lockers and driving lights will vary depending on whether the accessory was fitted before or after your LINX installation. As LINX is customisable to your vehicle, contact us for a quote and to discuss your individual requirements.
FITTING - WHAT'S INVOLVED?
THE INITIAL SET UP OF LINX INVOLVES THE FOLLOWING:
- Mounting of the controller (varies by vehicle)
- Connecting the 4 input wires (from ignition, high beam headlamp, low beam headlamp and reverse lamp) to the controller
- Connecting the power loom to the controller
- Fit the mobile display screen with gimbal and optional vehicle specific mount bracket
- Connecting the USB cable (hidden) from the controller to the mobile display screen
- Checking and downloading any available models or latest software
Please note, vehicle-specific A-Pillar mounts are sold separately.
Congratulations on the purchase of your LINX!
Your LINX is a powerful tool, and one of its key features is its expandable platform for future modules and accessories.
To be sure you don’t miss out on platform upgrades, and to be able to upgrade your system with new complementary and optional modules we require you to register your LINX via the form below.
Most of our orders are shipped to you by DHL. On orders under £50.00 you will be presented with the option to choose from available couriers who you'd like to pay to have ship your order. In all instances you will be sent tracking information or contact details regarding your shipment.
We aim to get your Douglass Motors order to your door as quickly as possible, typically within 1-3 business days using our standard courier services. Some exceptions apply.
Yes! As soon as your item has been dispatched by the team here at Douglass Motors you will receive tracking information by sms and email.
We accept all major Credit and Debit card providers in addition to ApplePay, GPay, ShopPay and Laybuy. Unfortunately, we cannot accept cheques or money orders.
Douglass Motors uses 3D Secure Verification and leading payment partner Stripe to handle all secure payment transactions.
At this time the only alternative payment method supported is Laybuy.
We offer a fully furnished returns process, and our shipping partners DHL and TNT will collect your return on our behalf at no cost to you.