ARB high-volume twin on-board compressor to suit the high volume airflow needs of most air powered tools. It also suits the actuation and control needs of the ARB Air Locker in the harsh and demanding environment of the ARB Air Locker user.
> Pneumatic supply and electrical control for ARB Air Locker(s). (Air Locker Manifold Kit #171503 required)
> Rapid inflation of small, medium and large tires.
> Air tools rated up to 85LPM [3CFM] @ 6Bar [90PSI] continuous supply.
> Air tools rated higher than 85LPM [3CFM] @ 6Bar [90PSI] using an optional air tank suitable to the run time requirements.
> Fully assembled and tested air compressor - 12V
> Complete wiring loom w/ Air Locker solenoid plug-in terminals.
> Automotive OEM quality compressor isolating switch.
> 2 x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges.
> Mounting bolts and washers.
> Comprehensive photo illustrated installation guide.
> Constructed primarily of light weight, high strength, engineering grade materials, including military and aerospace standard components.
> Pressure switch controlled air manifold system regulates pressure between 9.3Bar [135PSI] and 10.3Bar [150PSI] suited to air tools and all ARB Air Locker equipped vehicles.
> Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
> High efficiency design consumes only 56 Amps at maximum air flow.
> Built with sealed components for moisture and dust resistance.
> Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
> Ducted IP55 sealed brushless DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature conditions).
> Anti-vibration / sound deadening is integrated into the mount.
> Relocatable splash resistant air filter assemblies for cleaner, cooler air supply and versatile waterproof air intake positioning.
> High density and high flow washable sintered bronze air filter elements.
> Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
> Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
> Motors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
> Motors are internally thermal protected against extreme temperature damage.
> Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing.
> Over-pressure safety valve equipped.
> Sealed illuminated automotive grade dash switch included.
> Fully serviceable and all replacement parts available.
> EMF suppressed for use in proximity to sensitive electronic equipment.
> CE and C-Tick compliant.
> Engineered, built, and individually dyno-tested in Australia from local and imported components.
ARB Tyre Inflation Kit
Provides fast, accurate inflation.
The ARB tyre inflation kit for air compressors is specially sourced from Japan, providing a unique high-heat tolerant hose for the hi-output compressor (DA4190). The practical kit includes a dust resistant air chuck and an enclosed internal bearing system to prevent dirt ingestion.
> Suitable for camping, touring and off-road applications as well as everyday usage.
> Provides fast, accurate inflation.
Kit includes -
1 x high heat pressure hose
1 x ARB air chuck with quick press fitting
1 x ARB T-fitting for use with the ARB air compressor (DA4190) and an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and footballs
ARB Inflator with Gauge
Compatible with ARB air compressors
> Compatible with ARB air compressors.
> Easy to read dial with dual scale PSI/bar increments.
> Quality bronze bourdon tube gauge design.
> Fully geared, solid brass precision movement.
> Protective rubber gauge guard.
> Air bleed button for deflating.
> 330mm stainless braided flexible hose.
> Clip on chuck.
> Incorporates ¼ NPT-US standard made air fitting.
> Internal air shut off value.
ARB Air Tank
Ideal for use with ARB’s twin motor and high output on-board compressors.
> 4 litre aluminium air tank
> Rated to a maximum working pressure of 1030KPA (150PSI)
> Delivers high volume air output suitable for rapid tyre inflation and most air powered tools
> Two 1/4NPT ports (input and output) with JIC-4 male fitting pre-installed
> Designed for use with ARB’s on-board compressors
> 50% lighter than an equivalent steel tank
> Mounting hardware included
Available in the UK only
We use DHL or TNT to ship your Douglass Motors order to you as quickly and safely as possible. Occassionaly some of our suppliers may delivery directly to you using an alternative courier, or their own vehicles.
We aim to get your Douglass Motors order to your door as quickly as possible, typically within 1-3 business days using our standard DHL/TNT service.
Yes! As soon as your item has been dispatched by the team here at Douglass Motors you will receive tracking information by sms and email.
We accept all major Credit and Debit card providers in addition to ApplePay, GPay, ShopPay and Laybuy. Unfortunately, we cannot accept cheques or money orders.
Douglass Motors uses 3D Secure Verification and leading payment partner Stripe to handle all secure payment transactions.
At this time the only alternative payment method supported is Laybuy.
We offer a fully furnished returns process, and our shipping partners DHL and TNT will collect your return on our behalf at no cost to you.