Roller Drawer Slide Kitchen [1045]

[PLEASE NOTE: DELIVERY OF THIS ITEM WILL BE MADE ON A PALLET AND WILL TAKE UP TO 10 DAYS]

Adding to ARB's existing comprehensive range of Outback Solutions Roller Drawers is the latest fully on-board, integrated and perfectly practical ARB Slide Kitchen, complete with sink!

Blog post

While contained within an ARB modular drawer frame, the Slide Kitchen is not just a drawer, but a complete, stainless steel, slide-out kitchen with bench space, a Thetford three-burner cooktop, kitchen sink and its very own utensils drawer.

The ARB Slide Kitchen has been designed specifically to be integrated with existing ARB drawer installations. The new modular unit is built to the same dimensions of their existing full height 1045mm deep (typically used in a dual cab pickup) modular drawer profile, and due to the length required is only available in this size.

The Slide Kitchen slots right in and can be accompanied by any of ARBs roller (RF), mid-height (RFH) or full height drawers (RD/RDRF), and then finished off neatly with their existing range of vehicle-specific side panels.

It can also be installed independent of any other drawers as a stand alone unit for use in custom builds such as wagons, vans, camping canopies, service bodies and camper trailers.

The three-burner stove is designed and manufactured in England by the reputable appliance manufacturer Thetford. The burners are housed & protected by a toughened glass lid (which doubles as a splashback)within a sunken stainless-steel dish, providing its own level of wind protection and easy clean-up. The stove is suitable for pans or pots up to 22cm for the larger rapid burner and up to 11cm for the two smaller burners.

For added safety, the gas automatically turns off if the burners go out or when the lid is shut.

Gas is delivered via a quick-connect bayonet gas connector, which can only be connected after set-up and has to be disconnected to store, further improving the safety of this device as a whole.

The stoves are all 100% tested to strict quality control to ensure its ultimate safety before leaving the plant in England.

Accessing the kitchen is no different to opening any ARB drawer; you simply pull the mechanical latch and roll the stainless steel bench out.

Once fully extended, the bench locks into place and you can operate the kitchen as a simple bench top with drawer or you can release the swing-away stove and sink by lifting the red locking tab.

The ARB Slide Kitchen is manufactured and assembled in-house by ARB to ARBs strict quality control standards. ARB source the drawer cabinet with ARBs engineered runners from their existing drawer manufacturer. ARB manufacture the unique swing out kitchen module, and assemble the entire unit in house.

Features

• 930mm x 505mm stainless steel worktop plus 605mm x 505mm sliding separate top
• 25kg working load (evenly spread)
• 3 burner gas stove with 1x 2.5kW and 2x 1.75kW burners, electronic ignition and glass lid
• 7 litre collapsible sink with dish drying base and utensils holder, rated to 90 degrees Celsius
• Sink can be flipped to either left or right side
• Utensils drawer (450mm D x 290mm W x 110mm H)
• Kitchen latches into place when fully extended
• Easy to clean stainless steel construction